Cisco AIR-PWRINJ6= Power Injector for Cisco Aironet 2800/3800 Access Points

Description

Cisco Power Injector for Cisco Aironet 2800/3800 Access Points

SKU: AIR-PWRINJ6

The Cisco Aironet Power Injector AIR-PWRINJ6= increases wireless LAN deployment flexibility of supported Cisco Aironet Access Points by providing an alternative powering option to local power, inline power-capable multiport switches, and multiport power patch panels.

The single-port PoE injector provides up to 30 Watts and is compliant with IEEE 802.3af (15.4 W) and IEEE 802.3at (30 W) systems. This power injector is for use with Cisco access points requiring 802.3at power input.

Cisco Aironet Power Injector (AIR-PWRINJ6=) Features

1	AP Connector Port (Data + Power Out)	3	Status LED1
2	Switch Connector Port (Data In)	4	C13 Power Connector

The Status LED indicates the following system status events:

• AC Power – Depending on the model, the LED is amber or blinks green to indicate that the Power Injector is powered ON and ready for connection.
• AP Power – The LED lights solid green to indicate that a valid IEEE 802.3af or 802.3at load (AP) is detected and powered ON. The LED remains green when powering the Access Point even if the uplink is not connected. The LED is green for showing that the power injector is providing power to the Access Point.

Figure 2shows a typical installation scenario.

Figure 2Power Injector AIR-PWRINJ6= Installation Scenario

Unpacking the Power Injector

The typical power injector package contains the following items:

• Power injector
• Power cord
• URL Pointer Card and China RoHS Statement

If any item is missing or damaged, contact your Cisco representative or reseller.

Additional Requirements

Use the power cord that shipped with your power injector to supply power for the injector. If you install the access point in an environmental air space such as above a suspended ceiling, check national and local safety codes to make sure that the Ethernet cable you connect to the unit meets applicable standards.

Specifications

Specification	AIR-PWRINJ6=
Dimensions (W, H, L)	Model 1: 53 mm x 32.5 mm x 140 mm 2.09 in x 1.28 in x 5.5 in Model 2: 65 mm x 36 mm x 140 mm 2.55 in x 1.42 in x 5.51 in
Data Rates	10/100/1000 Mbps
PoE Output	Pin Assignment and Polarity: IEEE 802.3at compliant Output Power Voltage: 55V DC
User Port Power	30 Watts
Input Power Requirements	AC Input Voltage: 100 to 240V AC AC Input Current: 0.8 A @ 100 – 240 V AC AC Frequency: 50 to 60 Hz
Weight	Model 1: 0.44 lbs (200 g) Model 2: 0.47 lbs (215 g)
Connectors	Shielded RJ-45, EIA 568A and 568B
Environmental Conditions	Operating Ambient Temperature: -4F to 104F (-20C to 40C) at 30 W -4F to 122F (-20C to 50C) at 25 W Operating Humidity: Maximum 90%, Non-condensing Storage Temperature: -4F to 158F (-20C to 70C)
Reliability	MTBF: 100,000 hrs @ 25C
Thermal Rating	20 BTU/Hr @ 240 V AC
Regulatory Compliance	IEEE 802.3 at (PoE), China RoHS Compliant, WEEE Compliant, CE Compliant
Electromagnetic Emission and Immunity	FCC Part 15, Class B EN 55022 Class B (Emissions) EN 55024 (Immunity) VCCI
Safety	UL 60950-1 IEC/EN 60950-1
Stacking restrictions	Do not stack. Do not bundle the power injector and AC power cable.